Table of Contents
Advertisement
Hysteresis setting
Set the pressure referring to
the setting method on page 21.
Hysteresis mode: [H_1]
Window comparator mode: [WH1]
The snap shot function can be used. (Refer to page 49.)
Press the
button to set.
Delay time setting
Set the delay time referring to the
setting method on page 23.
Press the
button to set.
Display colour setting
Press the
or
Press the
1: Selected item becomes valid after pressing the
2: After enabling the setting by pressing the
the
button for 2 seconds or longer.
Move on to delay time setting.
Move on to display colour setting.
button to select the display colour.
button to set.
[F 1] Setting of OUT1 completed
button.
button, it is possible to return to the measurement mode by keeping pressing
-29-
Return to function selection mode.
No.PS※※-OMS0007-D
Advertisement
Table of Contents
