Product No.
Enclosure
Withstand voltage
Insulation resistance
Ambient temperature range
Operating humidity range
Standard
Length of lead wire with connector
1: Value without digital filter (at 0 ms).
2: If the applied pressure fluctuates around the set value, the hysteresis must be set to a value more than the amount of fluctuation or
chattering will occur.
3: This setting is only available for models with the units selection function. Only MPa or kPa is available for models without this function.
4: The response time indicates when the set value is 90% in relation to the step input.
○Cable specifications
Conductor area
Outside diameter
Colour
Finished outside diameter
○Piping/weight specifications
Product No.
Port size
Pressure-sensing part
Piping port (Common)
Piping port
Body
Lead wire with connector
ZSE20
(Vacuum pressure)
(Compound pressure)
1000 VAC for 1 minute between terminals and housing
50 MΩ or more between terminals and housing (with 500 VDC megger)
Operation: -5 to 50
(No condensation or freezing)
Operation, Storage: 35 to 85%RH (No condensation)
CE marked (EMC directive/RoHS directive)
0.15 mm
Brown, Blue, Black (3 core)
M5
M5 x 0.8
PBT, CB156, heat resistant PPS, O-ring: HNBR
C3604 (Electroless nickel plating), SUS304,
-
22 g
-62-
ZSE20F
ISE20
(Positive pressure)
IP40
o
o
C, Storage: -10 to 60
C
2 m
2
(AWG26)
1.0 mm
3.4
01
N01
R1/8
NPT1/8
Silicon
NBR
32 g
34 g
+35 g
No.PS※※-OMS0007-D