Table of Contents
Advertisement
Reference Information
___________________________________________________________
This section provides procedures for mounting the DTP HDMI 4K 230 Tx/Rx transmitter and receiver and
disconnecting the ground between them.
•
Mounting the Transmitter or Receiver
•
Disconnecting the Ground
Mounting the Transmitter or Receiver
ATTENTION:
•
Installation and service must be performed by authorized personnel only.
•
L'installation et l'entretien doivent être effectués uniquement par un technicien qualifié.
•
Avoid ground potential differences between the transmitter and receiver installation sites, which
can lead to equipment damage or a missing or unstable picture. If a potential difference cannot
be avoided, remove the ground connection between the units and locally power both units (see
Disconnecting the Ground
•
Évitez les différences de potentiel de mise à la terre entre les sites d'installation d'émetteur et de
récepteur de commutation, qui pourraient endommager l'équipement ou rendre l'image invisible ou
irrégulière. Si une différence de potentiel ne peut être évitée, enlevez la connexion de mise à la terre
entre les unités et alimentez les deux unités localement (voir Déconnecter la mise à la terre).
The 1-inch high, quarter rack width DTP HDMI 4K 230 transmitter or receiver can be placed on a table, mounted
in a rack, or mounted under a desk or table. The receiver can also be mounted on a projector bracket.
Tabletop Use
Affix the included rubber feet to the bottom of the unit and place it in any convenient location.
Mounting kits
Mount the unit using any optional compatible mounting kit listed on the Extron website (www.extron.com), in
accordance with the directions included with the kit. For rack mounting, see
on page 12.
on page 13).
DTP HDMI 4K 230 Tx/Rx Transmitter and Receiver • Reference Information
UL Guidelines for Rack Mounting
11
Advertisement
Table of Contents
