Table of Contents
Advertisement
TP Cable Advantages
Twisted pair cable is much smaller, lighter, more flexible, and less expensive than coaxial or HDMI cable. These
transmitter and receiver twisted pair (TP) products make cable runs simpler and less cumbersome. Termination of
the cable with RJ-45 connectors is simple, quick, and economical.
NOTE: Do not use Extron UTP23SF-4 Enhanced Skew-Free AV UTP cable or STP201 cable to link the
transmitter and receiver. The DTP HDMI 4K 230 Tx/Rx does not work properly with these cables.
Control Communications
The RS-232 and IR communications are a passive pass-through only. The transmitter and receiver do not
generate or respond to the RS-232 and IR communication signals.
Features
•
Receives HDMI plus control and analog audio up to 230 feet (70 meters) over a shielded CATx cable —
The DTP HDMI 4K 230 Rx provides high reliability and maximum performance on an economical and easily
installed cable infrastructure.
•
Input: One DTP 230 twisted pair input on RJ-45
•
Outputs: One HDMI, stereo audio on captive screw
•
Supports computer and video resolutions up to 4K — Supports 4K/60 4:2:0 and 4K/30 4:4:4, maintaining
superior image quality at the highest resolutions.
•
Supported HDMI specification features include data rates up to 10.2 Gbps, Deep Color up to 12-bit, 3D, HD
lossless audio formats, and CEC pass-through.
•
HDCP 2.3 compliant — Ensures display of content-protected 4K video media and maintains interoperability
with earlier versions of HDCP.
•
Remote power capability — For simplified installation, the receiver can be remotely powered by a DTP-
enabled product over the twisted pair connection.
•
Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
•
Compatible with CATx shielded twisted pair cable — Shielded twisted pair cabling with solid center
conductor sizes of 24 AWG or better is recommended for optimal performance.
•
Accepts additional analog stereo audio signals — The DTP HDMI 4K 230 Rx accepts stereo analog audio
from a DTP-enabled product. Embedded digital audio is not de-embedded from the digital video signal.
•
Bidirectional RS-232 and IR for AV device control — Bidirectional RS-232 control and IR signals can
be transmitted alongside the video signal, allowing remote AV devices to be controlled without the need for
additional cabling.
•
Supports multiple embedded audio formats — The DTP HDMI 4K 230 Rx is compatible with a broad
range of multi-channel audio signals, providing reliable operation with HDMI sources.
•
Supports EDID and HDCP transmission — DDC channels are actively buffered, allowing continuous
communication between source and display.
•
Compatible with all DTP 230 Series transmitters and DTP-enabled products — Enables mixing and
matching with desktop and wallplate transmitters, as well as other DTP-enabled products to meet application
requirements.
•
LED indicator for signal presence and power — Provides visual indication of system status for real-time
feedback and monitoring of key performance parameters.
•
RJ-45 signal and link LED indicators for DTP port — Provides a means for validating signal flow and
operation, allowing quick identification of connectivity issues.
•
UL 2043 plenum rated — The DTP HDMI 4K 230 Rx meets UL 2043 for smoke and heat release installation
within a plenum airspace above a drop ceiling - power supply excluded. Above-the-ceiling placement conceals
the receiver to prevent theft, and is convenient for installing equipment when space inside the room is limited.
DTP HDMI 4K 230 Tx/Rx Transmitter and Receiver • Introduction
2
Advertisement
Table of Contents
