Footswitch/Foot Controller Settings; Settings; Assigning Specific Functions To Each Foot Pedal - Yamaha PSR-S710 Reference Manual

Footswitch/Foot Controller Settings

Assigning Specific Functions to Each Foot Pedal
The functions assigned by default to the connected footswitch or foot controller can be changed—for
example, letting you use the footswitch to start/stop Style playback, or use the foot controller to produce
pitch bends.
NOTE For information on how to connect a foot pedal or what kinds of pedals can be connected, refer to the Owner's Manual, chapter 10.
1
Call up the operation display.
[FUNCTION] → [D] CONTROLLER
2
Use the [A]/[B] buttons to select one of two foot pedals to which the function is to be
assigned.
3
Use the [1 ▲▼] buttons to select the function to be assigned to the pedal specified in
step 2.
For information on available parameters, see
You can also assign the other functions to the pedal—punch in/out of Song
NOTE
tions to the pedal, the priority is: Punch in/out of Song → Registration Sequence → Functions assigned here.
4
Use the [2 ▲▼]–[8 ▲▼] buttons to set the details of the selected functions (the part
for which the function is applied, etc.).
The available parameters differ depending on the function selected in step 3.
5
If necessary, set the polarity of the pedal by using the [I] button.
Pedal on/off operation may differ depending on the particular pedal you've connected to the instrument.
10
For example, pressing down on one pedal may turn the selected function on, while pressing a different
make/brand of pedal may turn the function off. If necessary, use this setting to reverse the operation.
■ Assignable Pedal Functions
For functions indicated with "*", use only the foot controller; proper operation cannot be done with a
footswitch.
ARTICULATION 1/2
(PSR-S910)
VOLUME*
90
PSR-S910/S710 Reference Manual
2
3
When you use a Super Articulation Voice that has an effect assigned to the
pedal/footswitch, you can enable the effect by pressing the pedal/footswitch.
You can turn this function on or off for each keyboard part on this display.
Allows you to use a foot controller to control the volume. You can turn this
pedal function on or off for each part on this display.
→ TAB [E][F] FOOT PEDAL
4
pages 90–92.
(page 52) and Registration Sequence
5
(page 69). If you assign multiple func-