Editable Parameters In The Voice Set Displays - Yamaha PSR-S710 Reference Manual

Yamaha psr-s710: reference guide
Hide thumbs Also See for PSR-S710:
Table of Contents

Advertisement

Editable Parameters in the VOICE SET Displays

The Voice Set parameters are organized into five different displays. The parameters in each display are
described separately, below.
The available parameters differ depending on the Voice.
NOTE
■ COMMON Page
[1 ▲▼]
VOLUME
[2 ▲▼]/
TOUCH SENSE
[3 ▲▼]
[4 ▲▼]/
PART OCTAVE
[5 ▲▼]
[6 ▲▼]
MONO/POLY
[7 ▲▼]
PORTAMENTO
TIME
Adjusts the volume of the current edited Voice.
Adjusts the touch sensitivity (velocity sensitivity), or how greatly the vol-
ume responds to your playing strength.
TOUCH SENSE DEPTH
Changes to velocity curve according to
VelDepth (with Offset set to 64)
Actual Velocity for
tone generator
Depth=127 (twice)
127
Depth=64 (normal)
64
Depth=32 (half)
Depth=0
0
64
127
Received Velocity
(Actual KeyOn speed)
DEPTH
Determines the velocity sensitivity, or how much the level of the Voice
changes in response to your playing strength (velocity).
OFFSET
Determines the amount by which received velocities are adjusted for the
actual velocity effect.
Shifts the octave range of the edited Voice up or down in octaves. When
the edited Voice is used as any of the RIGHT 1–2 parts, the R1/R2 param-
eter is available; when the edited Voice is used as the LEFT part, the
LEFT parameter is available.
Determines whether the edited Voice is played monophonically or poly-
phonically. This setting can also be made from the VOICE CONTROL
[MONO] button on the panel.
Sets the portamento time (pitch transition time) when the edited Voice is
set to "MONO" above.
NOTE
The Portamento Time determines the pitch transition time. Portamento is a function that creates a
smooth transition in pitch from the first note played on the keyboard to the next.
TOUCH SENSE OFFSET
Changes to velocity curve according to
VelOffset (with Depth set to 64)
Actual Velocity for
tone generator
Offset=96 (+64)
Offset=127 (+127)
127
Offset=64 (normal)
64
Depends
on offset
Offset=32 (-64)
0
64
127
Depends
Received Velocity
on offset
(Actual KeyOn
speed)
Offset=0 (-127)
PSR-S910/S710 Reference Manual
1
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Psr-s910

Table of Contents