Editing Filter Parameters - Yamaha PSR-S710 Reference Manual

[1 ▲▼]–
VOICE NAME
[3 ▲▼]
[4 ▲▼]–
REVOICE TO
[6 ▲▼]
[F] ALL REVOICE
[I] BASIC
REVOICE
[J] ALL NO
REVOICE
2
Press the [8 ▲] (OK) button to apply your Revoice settings.
To cancel the Revoice operation, press the [8 ▼] (CANCEL) button.
NOTE
3
In the VOL/VOICE Page, press the [F] button to set the SONG AUTO REVOICE to ON.

Editing FILTER Parameters

[D]/[I] HARMONIC
CONTENT
[E]/[J] BRIGHTNESS
1
Selects the XG Voices to be replaced (Voices usually used when playing
back).
Selects the Voices used to replace the XG Voices (when SONG AUTO
REVOICE is set to ON).
Replaces all of the replaceable XG Voices with the rich and authentic
Voices of the PSR-S910/S710.
Replaces only the recommended Voices that are suitable for playing back
the song.
All the Voices are returned to the original XG Voices.
Allows you to adjust the resonance effect
Determines the brightness of the sound for each part by adjusting the cut-
off frequency (page 12).
2
(page 12) for each part.
PSR-S910/S710 Reference Manual
8
73