Connecting A Footswitch/Foot Controller - Yamaha CLAVINOVA CVP-701 Owner's Manual

Connecting a Footswitch/Foot Controller

The FC4A, FC4 or FC5 footswitches and the FC7 foot controller (sold separately) can be connected to the
[AUX PEDAL] jack. A footswitch can be used for switching functions on and off, while a foot controller
controls continuous parameters such as volume.
Foot Pedals
Footswitch
FC4A/FC4
 Example 1: Controlling the volume of the performance data played on the keyboard by
a foot controller.
Connect an FC7 foot controller to the [AUX PEDAL] jack. With the initial factory settings, no special setup
is necessary.
 Example 2: Controlling Song Start/Stop by a footswitch
Connect a footswitch (FC4A/FC4 or FC5) to the [AUX PEDAL] jack.
To assign the function to the connected pedal, select "SONG PLAY/PAUSE" by using the [1] buttons
in the operation display:
[FUNCTION] → TAB [L][R] MENU1 → [D] CONTROLLER → TAB [L][R] PEDAL → [A]/[B] AUX
NOTE
Make sure to connect or disconnect the pedal only when the power is off.
NOTE
Do not turn on the power to the unit while pressing the footswitch or foot controller. Otherwise, the switch or pedal type (on/off) will be reversed.
Advanced Features
Refer to the Reference Manual on the website,
Assigning specific functions to
each foot pedal:
Footswitch
FC5
Chapter 11
[FUNCTION] → TAB [L][R] MENU1 → [D] CONTROLLER →
TAB [L][R] PEDAL
Foot Controller
FC7
.
CVP-701 Owner's Manual
11
105