Split Point Settings - Yamaha PSR-S710 Reference Manual

Split Point Settings

These are the settings (there are two Split Points) that separate the different sections of the keyboard: the
Chord section, the LEFT part section and the RIGHT 1 and 2 section. The two Split Point settings (below)
are specified as note names.
1
Call up the operation display.
[FUNCTION] → [C] STYLE SETTING/SPLIT POINT/CHORD FINGERING → TAB [E][F] SPLIT
2
POINT
2
Set the Split Point.
[F]
[G]
[H]
[1 ▲▼]/
[2 ▲▼]
[3 ▲▼]/
[4 ▲▼]
20
PSR-S910/S710 Reference Manual
Split Point (S)
Chord section
Split Point (S+L) Sets the Split Point (S) and Split Point (L) to the same note. Press the [F]
button and rotate the [DATA ENTRY] dial. You can also specify the Split
Point directly from the keyboard by pressing the desired key on the key-
board while holding the [F] button.
Split Point (S) Sets each Split Point. Press one of the desired buttons and rotate the
[DATA ENTRY] dial. You can also specify the Split Point directly from
the keyboard by pressing the desired key on the keyboard while holding
Split Point (L)
the [G] or [H] button.
NOTE Split Point (L) cannot be set lower than Split Point (S).
STYLE You can specify each Split Point by note name. "STYLE" indicates Split
Point (S) and "LEFT" indicates Split Point (L).
LEFT
Split Point (L)
Voice RIGHT
Voice LEFT
1–2
Split Point (S+L)
Voice RIGHT 1 and 2
Chord section
+ Voice LEFT