Calling Up Registration Memory Numbers In Order (Registration Sequence) - Yamaha PSR-S710 Reference Manual

Calling Up Registration Memory Numbers in Order (Registration Sequence)

As convenient as the Registration Memory buttons are, there may be times during a performance when you
want to quickly switch between settings—without having to take your hands from the keyboard. The
convenient Registration Sequence function lets you call up the eight setups in any order you specify, by
simply using the TAB [E][F] buttons or the pedal as you play.
1
Select the desired Registration Memory bank to program a sequence.
2
Call up the operation display.
[FUNCTION] → [E] REGIST SEQUENCE/FREEZE/VOICE SET → TAB [E][F] REGISTRATION
SEQUENCE
3
If you intend to use a pedal to switch Registration Memory settings, specify here how
the pedal will be used—to advance or to reverse through the sequence.
Use the [C] (REGIST+ PEDAL) button to select the pedal for advancing through the sequence.
Use the [D] (REGIST- PEDAL) button to select the pedal for reversing through the sequence.
3
4
If you assign the function to a pedal here, the other function set in the Foot Pedal display
NOTE
4
Use the [E] (SEQUENCE END) button to determine how Registration Sequence
behaves when reaching the end of the sequence.
Pressing the TAB [F] button or the "advance" pedal has no effect. The sequence is
• STOP
"stopped."
The sequence starts again at the beginning.
• TOP
The sequence automatically moves to the beginning of the next Registration Memory
• NEXT BANK
Bank in the same folder.
Indicates the name of the currently
selected Registration Memory Bank.
6
(page 90) becomes invalid.
PSR-S910/S710 Reference Manual
6
69