Midi Receive Settings - Yamaha PSR-S710 Reference Manual

MIDI Receive Settings

The explanations here apply to the RECEIVE Page in step 4 on
receive MIDI data and over which MIDI channels the data will be received.
1
1
Use the [A]/[B] buttons or [1 ▲▼]/[2 ▲▼] buttons to select the channel to be received.
The PSR-S910/S710 can receive MIDI messages over 32 channels (16 channels x 2 ports) by USB
connection.
2
Use the [3 ▲▼] buttons to select the part via which the selected channel will be
received.
With the exception of the two parts below, the configuration of the parts is the same as those already
explained elsewhere in the Owner's Manual.
KEYBOARD
The received note messages control the instrument's keyboard performance.
EXTRA PART 1–5
There are five parts specially reserved for receiving and playing MIDI data. Normally, these parts are not
used by the instrument itself. The PSR-S910/S710 can be used as a 32-channel multi-timbral tone
generator by using these five parts in addition to the parts (except for the microphone sound).
3
Use the [4 ▲▼]–[8 ▲▼] button to determine the types of data to be received.
MIDI transmission/reception via the USB terminal and MIDI terminals
The relationship between the [MIDI] terminals and the [USB] terminal which can be used for
transmitting/receiving 32 channels (16 channels x 2 ports) of the MIDI messages is as follows:
● MIDI reception
[MIDI IN] jack
MIDI/USB1
01–16
1 2
[USB TO HOST] jack
Port handling
USB1 USB2
Merge
USB2
01–16
page 93. This determines which parts will
The dots corresponding to each
channel (1–16) flash briefly
whenever any data is received on
the channel(s).
3
● MIDI transmission
[MIDI OUT] jack
MIDI/USB 01–16
PSR-S910/S710 Reference Manual
[USB TO HOST] jack
10
97