Adjusting The Volume Of The Style Or Riyaz; Setting The Split Point; Playing Chords Without Style Playback (Stop Accompaniment) - Yamaha PSR-I500 Owner's Manual

Styles and Riyaz Patterns
Adjusting the Volume of the Style
or Riyaz
You can adjust the volume balance between Style or
Riyaz playback and your keyboard performance.
1
Press the [FUNCTION] button.
2
Use the CATEGORY [<<] and [>>] but-
tons to call up "StyleVol" (Function 001)
or "RiyazVol" (Function 003).
3
Rotate the dial to set the volume
between 000 and 127.

Setting the Split Point

The point on the keyboard that separates the left-
hand area and the right-hand area of the keyboard is
called the "Split Point." The left-hand area is used to
specify the chord for Style playback, or to play the
Split Voice.
The default Split Point is key number 054 (the F#2
key), but you can change it to another key.
1
Press the [FUNCTION] button.
2
Use the CATEGORY [<<] and [>>] but-
tons to call up "SplitPnt" (Function 009).
You can call up this display also by pressing the
[STYLE] then holding the [ACMP] button for lon-
ger than a second.
62
PSR-I500 Owner's Manual
StyleVol
001
100
Style (or Riyaz) volume
SplitPnt
009
054
Split Point
3
Rotate the dial to set the Split Point
between 036 (C1) and 096 (C6).
Split Point ... default value: 054 (F#2)
060
036 048
(C3)
(C1) (C2)
Main Voice (and Dual Voice)
Split Voice,
chords (Style) or
keys (Riyaz)
Playing Chords Without Style
Playback (Stop Accompaniment)
If you press the [STYLE] button, press the [ACMP
ON/OFF] button to turn ACMP on (the ACMP ON
icon appears), and play the chord in the Auto Accom-
paniment area of the keyboard (with SYNC START
off), the chord sound will be heard without Style play-
back. This is referred to as "Stop Accompaniment."
The specified chord will be shown in the display, and
affects the Harmony function (page 21).
Appears when auto accom-
paniment is on
Auto Accompani-
ment area
072 084 096
(C4) (C5) (C6)
Specified
chord