Advertisement
Makesurethat the powercord is unpJuggerf. Assemblyrequirestwo persons.SetthetreadmHU
ina cleared
areaandremove aHpacking matedaUs, Donotdispose ofthepacking matedaUs until a ssemMy i scompUeted,
Note:
Theunderside o fthetreadmHU
waUking beUt is coated withhighoperformance
Uubdcant, During shipping, a small
amount o fUubdcant maybetransferred t o thetopofthewaUking beltortheshipping carton, T hisis a normaU c on-
ditionanddoesnotaffect t readmHU
performance, Uf t hereis Uubdcant ontopofthewaUking beUt, simply wipeoffthe
lubricant witha softclothanda mild,non-abrasive cleaner,
i
Assembly
requires
the includerf
hex keys
_ and your own philtips
screwrfriver
Use the drawings below to identify the assembly hardware, The number in parentheses below each drawing is
the key number of the part, from the PART LIST on pages 22 and 23, The number after the parentheses shows
the quantity needed for assembly, Note: If a part is not in the parts bag, check to see if it is preattached to one of
the parts to be assembled, If a part is missing, ca[[ toil-free
1-888-533-1333.
To avoid damaging
plastic
parts, do not use power toots for assembly.
Extension Leg Nut (67)-2
1" Tsk Screw (83)-2
Front Endcap
Screw (14)-2
Screw (3)-2
Handail Bolt (64)-4
2,25" Extension Leg Bolt (92)-2
2,5" Extension Leg Bolt (65)-2
1, Make sure that the power cord is unplugged.
With the help of a second person, carefully tip
the treadmill onto its left side as shown, Partially
fold the Frame (58) so the treadmill is more stao
ble, Do not fully foM the treadmill
untit it is
cornpleteJy assembled.
Insert an Extension Leg (89) into the base of the
Uprights (84), Hold an Extension Leg Nut (67) in
the bottom of the Extension Leg, and thread a
2,25" Extension Leg Bolt (92) into the top of the
Extension Leg, Next, thread a 2,5" Extension Leg
Bolt (65) into the bottom of the Extension leg,
Firrnty tighten the Extension
Leg Bolts.
Slide a Front Endcap (44) onto the base of the
Uprights (84), Partially tighten a Front Endcap
Screw (14) into the Front Endcap and the base,
84
58
14
Advertisement
