Setting Up Remote Control; Setting Up Ventilation                                           17; Setting Up Zoning                                               17; Setting Up External Control                                     17 - Aprilaire E080 Installation & Owner's Manual

SETTING UP REMOTE CONTROL – CRAWL SPACE/SEALED ATTIC
If wiring to a Model 76 for remote control (see pages 13 and 19
for details) press the or
SETTING UP VENTILATION
See page 14 for details if using the dehumidifier for ventilation.
SETTING UP ZONING
See page 15 if zoning the dehumidifier.
SETTING UP EXTERNAL CONTROL
If wiring to an external control (see page 13 for details) press the
button to ENABLE
or
button to ENABLE
ENABLING DEH W/AC
To allow dehumidification during active air conditioning, select
ENABLED and press the MODE button
To disable dehumidification when the air conditioning is on,
select DISABLED and press the MODE button This option may
be preferable when the air conditioning system has difficulty
maintaining the desired set point
APPLYING AN RH OFFSET
An offset can be applied to the onboard humidity reading to
avoid discrepancies with other humidity-measuring devices in
the home Use the or
to 5% Press the MODE button to exit the installer setup screens
button to select an offset from -5%
17