Information About Maintenance - Kohler KDI 3404TM Owner's Manual

5.1 Useful information about maintenance
• This chapter shows all operations described in the Tab. 5.1, Tab. 5.2,
Tab. 5.3 and Tab. 5.4 if you have the skills appropriate may be directly
carried out by the user.
• Periodic inspection and maintenance operations must be carried
out as indicated in this manual and are the responsability of the user.
• Failure to comply with these service and maintenance intervals
increases the risk of technical damage to the engine. Any non
compliance makes the warranty become null and void.
• In order to prevent personal and property damage read carefully the
instructions listed below before proceeding with any operation of the
engine.
5.2 Periodic maintenance
The intervals of preventive maintenance in Tab. 5.1, Tab. 5.2, Tab. 5.3 and Tab. 5.4 refer to the engine operating under normal
operating conditions with fuel and oil meeting the recommended specifications.
5.1
Engine oil level
Coolant level
Water presence in fuel filter
Cartridge dry-type air filter
Radiator heat-exchange surface and Intercooler
Alternator belt
Rubber hose (intake air / coolant)
Fuel hose
Starter Motor
Alternator
5.2
Cartridge dry-type air filter
Intake manifold hose (air filter - intake manifold)
Coolant hoses
Fuel line hose
Alternator
belt
Coolant
5.3
KDI Mechanical Injection Tier 3 – Stage IIIA
KDI Mechanical Injection Uncertified Engines
ED0053030120 _08.1
Index

INFORMATION ABOUT MAINTENANCE

OPERATION DESCRIPTION
(8)
(8) (9)
(2)
(8)
(6)
(6)
OPERATION DESCRIPTION
(2)
(6) (7)
(6) (7)
Poly-V belt heavy environmental condition
Poly-V belt standard condition
OAT
(6)
HOAT
(6) (10)
ENGINE OIL AND OIL FILTER CARTRIDGE REPLACEMENT
ENGINE VERSION
• Inspections must be made when the engine is off and cold.
• Place engine on level surface to ensure accurate
measurement of oil level.
• Before starting, to avoid spillages of oil make sure that:
- the oil dipstick is inserted correctly;
- also check that:
oil drain plug and
oil filler cap are tightened firmly.
• Before proceeding with operation, read
CLEANING AND CHECKING
100
(2) (8)
REPLACEMENT
500
(6) (7)
(6)
(6)
250
(1)
(1) (11)
Warning
Important
Par. 3.2.2.
PERIOD (HOURS)
250 500 5000
PERIOD (HOURS)
2000 5000 6000
PERIOD (HOURS)
500
5
PAR.
5.3
5.7
5.9
5.4
5.5
5.8
5.6
--
--
--
PAR.
6.4
--
--
--
--
--
--
PAR.
6.1
6.2
23 EN