Kohler KDI 3404TM Owner's Manual page 25

5.5 Check of the radiator heat-exchanger surface
NOTE: Component not necessarily supplied by
KOHLER.
• Wear safety goggles when using compressed air.
• The radiator heat-exchange surface must be cleaned on
both sides.
1. Check the radiator heat-exchange surface D.
2. Clean the surface with a brush soaked in special detergent
if it is clogged.
5.6 Rubber hoses check
The check is carried out by exerting a slight deflection or
bending along the pipe and near the hose clamps.
Components must be replaced if they have clear signs of
cracks, tears, cuts, leaks and do not retain a certain degree
of elasticity.
• If hoses are damaged contact an authorized KOHLER
workshop.
1. Check that the:
-
Fuel system hoses A are intact.
-
Cooling circuit hoses B.
-
Vent system pipes C.
-
Air system ducts D.
ED0053030120 _08.1
Index
INFORMATION ABOUT MAINTENANCE
For safety precautions see
•
Important
Important
Danger
Cap.
D
5.4
B
5.5
D
C
D
5.6
3.
B
A
B
5
C
A
D
25 EN