Lock bracket
Table 5-10
Lock bracket description and part number
Description
Lock bracket
Before removing the lock bracket, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Remove the battery (see
4.
Remove the I/O board (see
Remove the lock bracket:
1.
Remove the Phillips M2.5 × 3.0 screw (1) that secures the lock bracket to the computer.
2.
Remove the lock bracket (2).
Reverse this procedure to install the lock bracket.
(Preparation for disassembly on page
Computer feet and bottom cover on page
Battery on page
22).
USB bracket, I/O board on page
Spare part number
L36911-001
20).
20).
34).
Component replacement procedures
35