Lock Bracket - HP Pavilion 15 Maintenance And Service Manual

Lock bracket

Description
Lock bracket
Before removing the lock bracket, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the lock bracket:
1. Remove the two Phillips M2.0×2.0 broad head screws (1) that secure the lock bracket to the computer.
2. Remove the lock bracket from the computer (2).
Reverse this procedure to install the lock bracket.
Bottom cover on page
Battery on page 31).
29).
Component replacement procedures
Spare part number
L23902-001
53