Lock bracket
Description
Lock bracket
Before removing the lock bracket, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
Remove the lock bracket:
1.
Remove the two Phillips M2.0×2.0 broad head screws (1) that secure the lock bracket to the computer.
2.
Remove the lock bracket from the computer (2).
Remove the lock bracket on models equipped with GTX graphics:
1.
Remove the two Phillips M2.0×2.0 broad head screws (1) that secure the lock bracket to the computer.
62
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page
35).
32).
Spare part number
L23902-001