Section 2: Routing - XiNCOM Twin WAN XC-DPG502 User Manual

Twin WAN Series – User Guide | v1

Section 2: Routing

These settings are provided to deal with non-standard situations or to provide additional
options for advanced users.
Using a Twin WAN Gateway with an existing DHCP server on your
network
If your LAN already has a DHCP Server and you wish to continue using it, the following
procedure is required:
1. The DHCP Server function in the Twin WAN Gateway must be disabled. This
setting is on the LAN & DHCP screen.
2. Your DHCP Server must be configured to provide the Twin WAN Gateway's
LAN IP address as the Default Gateway.
3. Your DHCP Server must provide correct DNS addresses to the PCs.
Dynamic Routing
RIP v2
RIP is a dynamic routing protocol which is used to direct traffic over the network.
Enabling this feature will automatically build static routes that define how the network
traffic flows. Select the appropriate port- LAN, WAN 1, and/or WAN 2- where other
network routers are connected to your network.
Note: Only use this if you have more than one router on the network. All routers or
gateways on the network must support both RIP and RIP v2.
Copyright © 2005 WINS International, LLC dba XiNCOM | All rights reserved.
Dynamic Routing Console
32