Physical Details - XiNCOM Twin WAN XC-DPG502 User Manual

Twin WAN Series – User Guide | v1

Physical Details

Twin WAN Gateway – Front Panel
Operation of the Front Panel LEDs is as follows:
System
Power- OFF - No Power
ON - Normal Operation
Status- OFF - Normal Operation
ON - Firmware not loaded or hardware error
Blinking - Data in/out
WAN
Link/ACT- OFF - 10BaseT connection or no connection on WAN port ½.
ON - Physical connection to the Broadband modem on WAN
port ½ established.
10/100M- OFF - 10 BaseT connection or no connection on WAN port ½.
ON - Physical connection using 100 BaseT on WAN port ½
established.
LAN
Link/ACT- OFF - No physical connection.
ON - Physical connection or data in/out.
10/100M- OFF - 10 BaseT connection on the corresponding LAN port or
no connection.
ON - Physical connection using 100 BaseT on WAN port ½
established.
Copyright © 2005 WINS International, LLC dba XiNCOM | All rights reserved.
7