Section 7: Multi Dmz & Upnp - XiNCOM Twin WAN XC-DPG502 User Manual

Twin WAN Series – User Guide | v1
Section 7: Multi DMZ & UPnP
Multi DMZ
The Multi DMZ feature allows each WAN port IP address to be associated with one (1)
computer on your LAN. All outgoing traffic from that PC will be associated with that
WAN port IP address. Any traffic sent to that IP address will be forwarded to the
specified PC. This allows unrestricted 2-way communication between the "DMZ PC" and
other Internet users or servers.
Note: The "DMZ PC" is effectively outside the Firewall making it more vulnerable to
outside attacks. Enable the DMZ feature when required.
Multi DMZ - Settings
Enable
Use this to enable or disable the DMZ setting when required.
Name
Enter a name to assist you to remember this setting. This name has no effect on the
operation.
For Static IP
Public IP Address
Enter the WAN port (Internet) IP address you wish to associate to a PC. This IP
address must have been allocated to you by your ISP.
Private IP Address (LAN)
Enter the IP address of the PC you wish to associate with this WAN port IP
address. This IP address should be fixed, or reserved. (See the Host IP section for
details on reserving an IP address)
For Dynamic IP
WAN
Select the desired WAN port.
Session
• Select DHCP if the IP address on this WAN port is dynamically assigned. You
can only select assign one (1) Private (LAN) IP address to each port.
• If using multi-session PPPoE, select the desired PPPoE session. These sessions
are defined on the Advanced PPPoE screen. You can assign one (1) Private
(LAN) IP address to each PPPoE session.
Copyright © 2005 WINS International, LLC dba XiNCOM | All rights reserved.
45