XiNCOM Twin WAN XC-DPG502 User Manual page 105

Twin WAN Series – User Guide | v1
4. Click on the Properties button. You should then see a screen like the following:
Ensure your TCP/IP settings are correct, as follows:
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the
default Windows settings. Restart your PC to ensure it obtains an IP Address from the
Twin WAN Gateway.
Using a fixed IP Address (Specify an IP Address)
If your PC is already configured, check with your network administrator before making
the following changes:
•
Enter the IP address of the Twin WAN Gateway in the Default gateway field and
click OK. (Your LAN administrator can advise you of the IP Address they
assigned to the Twin WAN Gateway)
•
If the DNS Server fields are empty, select Use the following DNS server
addresses. Enter the DNS address or addresses provided by your ISP and then
click OK.
Copyright © 2005 WINS International, LLC dba XiNCOM | All rights reserved.
Figure B. TCP/IP Properties (Windows 2000)
104