Chapter 1 - Basic Setup; Section 1: Overview - XiNCOM Twin WAN XC-DPG502 User Manual

Twin WAN Series – User Guide | v1
Chapter 1 – Basic Setup

Section 1: Overview

Basic setup of you Twin WAN Gateway will involve the following steps:
1. Connect the Twin WAN Gateway to one (1) PC and configure it to your existing
LAN.
2. Connecting one or two Broadband Modems to your Twin WAN Gateway.
3. Configuring the Twin WAN Gateway for Internet Access.
4. Configuring all PCs on your LAN to use the Twin WAN Gateway.
Requirements:
• One or two Broadband modems (T1, xDSL, Cable, and/or Satellite) with an active
account from your ISP(s).
• Two standard 10/100BaseT network (UTP) cables with RJ-45 connectors.
• TCP/IP network protocol must be installed on all PCs.
CAT-5 Ethernet Cables
Copyright © 2005 WINS International, LLC dba XiNCOM | All rights reserved.
Broadband Modems TCP/IP Enabled PCs
9