Gateway Configuration; Internet Services (Http) Gateway Configuration - Xerox DocuPrint 115 System Manual

Internet Services (HTTP) Gateway Configuration

Common Controller
2.

Gateway Configuration

Setting up the HTTP and SNMP gateways cannot be
accomplished through the graphical user interface and must be
set using the gwConfig utility through a UNIX Terminal window.
The IPP gateway is configured using the DocuSP interface.
Perform the following to configure the HTTP gateway:
1. Start the configuration utility. Type
./gwConfig
1..
NOTE: Refer to the instructions in the section, IPP Gateway
Configuration for information about starting the configuration.
2. Perform the following to set up the Internet Services (HTTP)
Gateway:
Enter the name of the gateway to be configured:
Internet Services
Configure the Internet Services Gateway? [Y/N]
y
Enter name: Value data
Printer URL: http://<controller name>.<domain
name>.com
NOTE: Use the IP address of the controller if there is no
domain name. For example, http://52.126.255.255.com
3. A confirmation message of the entered value displays.
Confirm that the entry is correct and enter y for yes.
4. Continue with this process for every value to be configured.
5. When all of the desired values have been configured, press
<Enter> at the Enter Name: [Value Data line].
6. When asked to accept the values and update the
configuration, enter y for yes.
2-1