Output Files; Properly Ejecting A Diskette From The Diskette Drive On A Docusp Workstation - Xerox DocuPrint 115 System Manual

System Guide

Output files

Properly ejecting a diskette from the Diskette drive on a DocuSP
workstation
Common Controller
Upon compilation of a JSL source file, the XDJC generates the
following:
• JSL source listing file
<filename>.lst or <filename>.LST
The filename is the name of the JSL file, excluding path
information. The case of the file extension corresponds with
the case of the file extension of the JSL source file.
• Resource listing file
<filename>.rsc or <filename>.RSC
The filename is the name of the JSL file, excluding path
information. The case of the file extension corresponds with
the case of the file extension of the JSL source file.
• Zero or more PDL object files of types
.JDL .CME .IDR
All filenames are in upper case and are written to the
directory <outpath>/VM10 where outpath is the output path
specified. Files are overwritten if the REPLACE option is
selected; otherwise they are renamed to $xx where xx is the
first two characters of the file type.
• a log file containing messages displayed to the screen
XDJC.LOG
The log file is written to the directory in which XDJC/Unix is
installed and is appended at each invocation of XDJC.
Several problems can arise if you use the eject button on the
floppy disk without first selecting Ejct in the software.
To properly and safely eject a floppy diskette (or other
mountable, removable media) perform the following:
1. Select [Setup] and then [Configuration]. The Setup
Configuration window displays.
2. Select the Peripherals tab.
3. Right-click on the drive entitled "floppy0."
.LIB .PDE .STK .TST
Troubleshooting
9-17