Helpful Security Tips - Xerox DocuPrint 115 System Manual

System Guide

Helpful Security tips

Common Controller
###100083/1 tli rpc/tcp wait root /usr/dt/bin/
rpc.ttdbserverd /usr/dt/bin/rpc.ttdbserverd
536870916/1
SUNWvts/bin/vtsk /opt/SUNWvts/bin/vtsk
Most of the files and processes modified in this document have a
corresponding man page that describes, in considerable detail,
their functionality. It is good practice to read the man pages on
each item to get an understanding of the process being modified
to ensure ahead of time if your workflow may be effected. The
following is an example of a man page command.
#man hosts.equiv<RETURN>
Additional information can be found in the Solaris Answerbook.
The Solaris Answerbook can be found online at almost every
University web page. A search for Answerbook should return
hundreds of sites.
If you are unfamiliar with the vi editor, you can use the GUI
based editor /usr/openwin/bin/textedit. To launch the editor login
as root enter the following:
#/usr/openwin/bin/textedit & <RETURN>
Textedit leaves a backup of the modified file in the same
directory. This backup file will have a % after the name. This file
can be deleted if you have already backed up the original file.
Always document and backup all files that you modify in case
some unforeseen problem. Example:
#cp /etc/inet/inetd.conf
inetd.conf.orig <RETURN>
If, for whatever reason, the DocuSP controller will not boot up
after your modifications, you can restore the software to its
original configuration by booting to single user mode. This is
done by typing in
boot -s
from the ok> prompt. You will be prompted for the root
password. Upon login as root, you can copy the original files
back. Example:
#cp /etc/inet/inetd.conf.orig /etc/inet/
inetd.conf <RETURN>
Security and Network Setup
dgram rpc/udp wait root /opt/
/etc/inet/
4-19