Local User Interface (Lui) Mapping To Mib; Printer And Job Messages; Appletalk Gateway Configuration; Queue Server Options - Xerox FREEFLOW 701P25032 System Manual

Gateway and Network Configuration

Local User Interface (LUI) mapping to MIB

AppleTalk gateway configuration

Queue server options

1- 1 2
The following table shows the mapping between the LUI and MIB:
Local User Interface
PrinterOperator
PrinterAdministrator
PrinterAdmin,
PrinterAdminURL
PrinterAdminPhoneNumber
PrinterLocation

Printer and job messages

SNMP can broadcast messages about the printer and the jobs on
the system. Printer messages may announce that the printer is
idle, printing, or out of paper. Job messages announce that jobs
are pending, processing, or completed. Other job-related
information may include the job owner's name, the job quantity,
the job identifier, etc.
The information that is displayed at an SNMP Manager may not
always reflect the exact status of a job or printer on the Xerox
FreeFlow Print Server Controller. Those Managers that do not
support loading of Management Information Bases (MIBs) only
displays the printer and job status that they support.
NOTE: "Forwarding" is not a job state that is broadcast by the
controller; therefore, job forwarding information is not displayed by
the SNMP job managers.
In Gateways, using the AppleTalk tab the administrator can enable
or disable the protocol. If the protocol is enabled, the administrator
can also select a default queue set for Appletalk.
In Gateways using the Queue Server tab, the administrator has
the option to enable or disable NetWare and to define a Preferred
Server Name. This entry field allows the administrator an easy
method to directly point to a replica or NDS server name.
Table 1-3
LUI Mapping to MIB
prtGeneralCurrentOperator
prtGeneralServicePersonsysContact
prtGeneralServicePersonsysContact
sysLocation
MIB
System Guide