Ventilation; Operator Accessible Areas; Maintenance; Before Cleaning Your Product - Xerox DocuPrint 100 Operation Manual

Safety

Ventilation

Operator accessible areas

Maintenance

Before cleaning your product

CE mark: Europe only

vi
Slots and opening in the enclosure of the product are provided for
ventilation. Do not block or cover the ventilation vents, as this
could result in the product overheating.
This product should not be placed in a built-in installation unless
proper ventilation is provided, please contact your Xerox
representative for advice.
Never push objects of any kind into the ventilation vents of the
product.
This product has been designed to restrict operator access to safe
areas only. Operator access to hazardous areas is restricted with
covers or guards, which would require a tool to remove. Never
remove these covers or guards.
Any operator product maintenance procedures will be described in
the user documentation supplied with the product. Do not carry
out any maintenance on the product, which is not described in the
customer documentation.
Before cleaning this product, unplug the product from the electrical
outlet. Always use materials specifically designated for this
product, the use of other materials may result in poor performance
and may create a hazardous situation. Do not use aerosol
cleaners, they may be flammable under certain circumstances.
January 1, 1995: Council Directive 73/23/EEC, amended by
Council Directive 93/68/EEC, approximation of the laws of the
member states related to low voltage equipment.
January 1, 1996: Council Directive 89/336/EEC, approximation of
the laws of the member states related to electromagnetic
compatibility.
NPS/IPS Extension Operations Guide