Changing Print Modes; Changing From Eps Print Mode To Nps/Ips Print Mode - Xerox DocuPrint 100 Operation Manual

Xerox docuprint 100: operations guide

Hide thumbs Also See for DocuPrint 100:

Table of Contents

NPS/IPS Extension Operations Guide

3 Changing print modes

This chapter provides information on switching between the

various print modes of the printing system.

NOTE: You must be logged in the system as either an Operator or

Administrator to switch from EPS to NPS/IPS mode.

Use the following procedure to change operating modes of the

printing system from EPS mode to NPS/IPS mode.

1. On the DocuSP Print Services window, click the Queue

Manager icon. The Queue Manager window opens.

2. In the Queue Manager window, hold all queues by performing

the following:

a. Right-click in the queue list area, and select [Select All]

from the pop-up menu.

b. Right-click again in the queue list area, and select [Do Not

Accept Jobs] from the pop-up menu.

c. Display the pop-up menu again, and select [Do Not

Release Jobs].

3-1

Table of Contents