Components Of The Nps/Ips Extension - Xerox DocuPrint 100 Operation Manual

Components of the NPS/IPS Extension

NPS/IPS Extension Operations Guide
NOTE: You can access some equivalent options on the EPS
by using the Job Manager and Queue Manager windows.
• 51 default PostScript Type 1 fonts
• Level 2 PostScript interpreter
NOTE: Ensuring that the queue names on the EPS are unique
and different from the Virtual Printer names on the NPS/IPS
will help prevent jobs from being sent in the wrong print mode.
Be sure to consider this when setting up your clients.
Both EPS and NPS/IPS:
• FIFO
• Background form
• Ability to add a VIPP start command
• Resource based scheduling
The NPS/IPS Extension option consists of the following system
components, which are added to the base DocuPrint 100/115/135/
155/180 EPS configuration:
• 9.1 gigabyte (GB) or larger external fixed disk drive
• 1 meter SCSI cable
• AC power cord
• NPS/IPS version 7.4.1 software or higher
The external fixed disk drive is located under the quarter-inch
cartridge (QIC) tape drive within the controller stand, and is
connected to the processor through the SCSI cable. This external
disk drive requires a separate AC power source.
Product overview
1- 5