Snapper RPX102 Owner's Manual page 94

10. ES STATEMENT OF COMPLIANCE (ORIGINAL)
pursuant to: Council Directive No. 2006/42/EC (Government directive NV 176/2008 Coll.)
Council Directive No. 2014/30/EU (Government directive NV 117/2016 Coll.)
Council Directive No. 2000/14/EC (Government directive NV 9/2002 Coll.)
A. We: Seco Industries, s.r.o., Jungmannova 11, Valdické Předměstí, 506 01 Jičín
ID No.: 05391423
B. Mechanical equipment
- name: Riding mower
- model : MJ 102 (RPX102-2692055-00)
- serial number: 000000000-999999999
Description:
The MJ 102 (RPX102) is a four-wheel self propelled mower with a Briggs & Stratton motor 7220EXi (40N8). The power drive
from the engine is transferred by V-Belts to the travel drive transmission on the rear axle with a continuously variable gear
and through an electromagnetic clutch to the mowing deck. The mowing deck is a twin-blade assembly with a vertical axis
of rotation and a coverage width of 102 cm that is driven by a double-sided V-belt.
C. Legislation forming the basis for assessment of compliance:
ČSN EN ISO 12100, ČSN EN ISO 5395-1,3, ČSN EN ISO 14982:2009
D. Assessment of compliance was performed according to the designated procedure in:
- EP and Council Directive No. 2006/42/EC, Annex VIII,(eqv.Annex no. 8, NV No. 176/2008 Coll.)
- EP and Council Directive No. 2014/30/EU, Annex II,(eqv.Annex no. 2, NV No. 117/2016 Coll.)
- EP and Council Directive No. 2000/14/EC, Annex VI,(eqv.Annex no. 5, NV No. 9/2002 Coll.)
E. Entities participating in the assessment of compliance:
Státní zkušebna strojů a.s. (SZS, a.s.)
Molákova 622/11, 163 04 Prague 8, Czech Republic
F. We confirm that:
- this mechanical equipment meets all respective provisions of the aforementioned directives (NV)
- measures have been taken to ensure the compliance of all products introduced to the market with the technical
documentation and the requirements contained in technical regulations.
- guaranteed emission level of acoustic power L
Measured mean values of acoustic power A depending on the engine used:
Engine
Briggs & Stratton 7220EXi (40N8)
Technical Documentation in the scope pursuant to annex VII for the Directive 2006/42/EC a pursuant to annex VIII for the Directive
2000/14/EC is kept at the place of business of the manufacturer at the address:
SECO Industries, s.r.o.
Jungmannova 11
Valdické Předměstí
506 48 Jičín
In Jičín, 18.10.2023
Therefore, some technical differences in terminology may appear in this manual when compared with the actual product. No claims can be deduced
from this. Print, duplication, publication and translation (even in part) must not be performed without the written consent of Seco Industries, s.r.o. The
manufacturer reserves the right to change technical parameters of the product, without prior customer notification.
issue the following statement:
Státní zkušebna strojů a.s. (SZS, a.s.), NB 1016
Třanovského 622/11
163 04 Prague 6, Czech Republic
is 100 dB(A)
WA G
Speed (min ) Measured level of acoustic power L
-1
2700
Ing. Aleš Housa
Mechanical Engineering Division Director
94
[dB(A)]
WA
100