Main Power Switch - Snapper RPX102 Owner's Manual

(3) BRAKE PEDAL AND PARKING BRAKE INDICATOR LIGHT
The indicator light serves to signal correct and incorrect starting of the engine (
parking brake.
(4) DEACTIVATION OF THE MOWING DECK DISENGAGEMENT FOR REVERSING
Switch R serves to disengage the automatic mowing deck disengagement function when reversing (
R

(5) MAIN POWER SWITCH

Serves to start up / shut off the engine. It has the following four positions:
STOP
STOP
STOP
STOP
STOP
(6) MOWING DECK ENGAGEMENT SWITCH
1
1
Pushing the engagement switch to position 1 engages the mowing deck. Pushing it to position 0 disengages the mowing deck.
0
0
Parking brake engaged signal
Brake pedal applied signal
The switch needs to be pressed when the mowing deck has already been automatically disengaged
but the blades have not yet stopped rotating (approx. 4 seconds) or when the mowing deck is started
immediately before the reverse travel pedal is stepped on. Then with every subsequent change in the
travel direction from reverse to forward, the disengagement of the mowing deck is again reactivated.
Ignition off / turn off the ignition
STOP
STOP
STOP
STOP
Turn on / turn off the headlights on the hood
STOP
Ignition on, the engine is running.
Start engine – starting position
ENGAGED
1
1
0
0 DISENGAGED
5.2), pushed down brake and engagement of the
Engagement of the mowing deck / the mowing deck is engaged
Disengagement of the mowing deck / the mowing deck is
disengaged
72
5.5.1).