1. Manuals
  2. Brands
  3. Snapper Manuals
  4. Lawn Mower
  5. R2167517BV
  6. Safety instructions & operator's manual

Snapper R2167517BV, RP2167517BV, RP215517BVE, WRP216517BE Safety Instructions & Operator's Manual

21” steel deck walk mowers series 17
Hide thumbs Also See for R2167517BV, RP2167517BV, RP215517BVE, WRP216517BE:
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL DESIGNATION
SELF-PROPELLED
CUTTING WIDTH
R – Recycling Model
W – Model Designation
55 – 5.50 HP (Engine Horse Power)
675 – 6.75 HP (Engine Horse Power)
Thank you for buying a SNAPPER Product! Before operating your Walk Behind, read this manual carefully and
pay particular attention to the "IMPORTANT SAFETY INSTRUCTIONS" on Pages 2 & 3. Remember that all
power equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in
accordance with the operating instructions and common sense.
COPYRIGHT © 2002
SNAPPER INC.
ALL RIGHTS RESERVED
Safety Instructions & Operator's Manual for
MODEL NUMBER EXPLANATION
R
P
P – Self Propelled Model
21 – 21" Cutting Width
21" STEEL DECK
WALK MOWERS
21
675
17
17 – Series Designation
B – Briggs & Stratton
V – Over Head Valve
E – Electric Start
SERIES 17
MODELS
R2167517BV
RP2167517BV
RP215517HC
RP2167517BVE
WRP216517BE
BV
ENGINE DESIGNATION
SERIES DESIGNATION
ENGINE HORSE POWER
H – Honda
C – Over Head Cam
MANUAL No. 7-4933 (Rev 1, 6/22/04)

Advertisement

Table of Contents
loading

Related Manuals for Snapper R2167517BV, RP2167517BV, RP215517BVE, WRP216517BE

Summary of Contents for Snapper R2167517BV, RP2167517BV, RP215517BVE, WRP216517BE

  • Page 1 675 – 6.75 HP (Engine Horse Power) Thank you for buying a SNAPPER Product! Before operating your Walk Behind, read this manual carefully and pay particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 & 3. Remember that all power equipment can be dangerous if used improperly.

  • Page 2: Important Safety Instructions

    If you have any questions pertaining to your machine which your dealer cannot answer to your satisfaction, call or write the Customer Service Department at SNAPPER, McDonough, Georgia 30253. Phone: (1-800-935-2967).

  • Page 3: Important Safety Instructions

    11. Have machine serviced by an authorized SNAPPER dealer at least once a year and have the dealer install any new safety devices. 12. Use only genuine SNAPPER replacement parts maintained.

  • Page 4: Table Of Contents

    SERVICE SCHEDULE ...23 Maintenance/Replacement Parts ...23 WARRANTY...24 PRIMARY MAINTENANCE ... 25-28 PRODUCT REGISTRATION FORM...29 The figures and illustrations in this manual are provided for reference only and may differ from your specific model. Contact your Snapper dealer if you have questions. IMPORTANT...

  • Page 5: Section 1 - Familiarization

    FIGURE 1.1 1.2 NOMENCLATURE The nomenclature drawing above, Figure 1.1, shows the essential parts of the SNAPPER WALK BEHIND MOWERS. It is recommended that all operators of the mower become thoroughly familiar with the controls, parts and operation of the mower before operating.

  • Page 6: Section 2 - Operating Instructions

    Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST Make the following checks and perform the service required before each start-up. 2.1.1. Check guards, deflectors, grass bag, adapter and covers to make sure all are in place and securely tightened. 2.1.2.

  • Page 7: Starting & Stopping Wheel Drive

    Section 2 - OPERATING INSTRUCTIONS 2.2 STARTING & OPERATION 2.2.1. ENGINE & BLADE (Choke Models) 1. Move fuel shut off valve to the “ON” position. See Figure 2.5. NOTE: Stop the engine (and blade) by releasing the blade control. FUEL SHUT OFF VALVE SHOWN IN THE “ON”...

  • Page 8: Handle Height Adjustment

    Section 2 - OPERATING INSTRUCTIONS 2.4 HANDLE HEIGHT ADJUSTMENT The height of the mower handle can be adjusted as follows: 1. Loosen the lower nuts on each lower handle as shown in Figure 2.8. HIGHER LOWER HANDLE LOOSEN LOWER NUTS ON EACH LOWER HANDLE FIGURE 2.8 2.

  • Page 9: Recycling Operation

    Section 2 - OPERATING INSTRUCTIONS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 10: Installation Of Grass Catcher (Slider Type)

    Section 2 - OPERATING INSTRUCTIONS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 11: Installation Of Discharge Deflector & Recycling Cover

    Section 2 - OPERATING INSTRUCTIONS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark components are HOT. Avoid serious burns, allow sufficient time for all components to cool. 2.10 INSTALLATION of DISCHARGE DEFLECTOR (Optional accessory on some models) Install discharge deflector if discharging is desired.

  • Page 12: Section 3 - Maintenance Instructions

    2. If liquid grease IS NOT visible on the input gear proper service (the small gear below the plug hole), add an amount, to cover gear, of Snapper “00” grease. See Figure 3.2. NOTE: Snapper “00” Grease (Part No. 2-9443) is available at your SNAPPER dealer.

  • Page 13: Check Mower Blade

    Section 3 – MAINTENANCE WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 14: Section 4 - Adjustments And Repair

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 15: Wheel Drive Control Adjustment

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 16: Driven And Drive Disc Service

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 17: Driven Disc Replacement

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 18: Driven Disc Bearing Replacement

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 19: Hex Shaft Bearing Replacement

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 20: Engine Drive Belt Replacement

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 21: Battery Service

    Section 4 - REPAIR & ADJUSTMENTS 4.5. BATTERY SERVICE 4.5.1. NEW BATTERY PREPARATION 1. Remove battery from carton. 2. Place battery in a well ventilated area on a level non-concrete surface. 3. Remove battery cell caps. Fill cells as required with electrolyte (purchased separately) to proper level.

  • Page 22: Troubleshooting

    1. Service mower blade. 2. Service and tighten loose parts. 3. Replace air lifts. Tighten to proper torque. 4. Replace belt. 1. Contact authorized SNAPPER dealer. 2. Replace traction drive belt. 3. Clean or replace driven disc. 1. Adjust cutting height.

  • Page 23: Service Schedule

    ITEM SERVICE PERFORMED Engine Oil Check Oil Level Initial Oil Change Periodic Oil Change Clean Sponge Element Air Pre-Cleaner Clean or Replace Air Cleaner Spark Plug Replace Engine Cooling Clean Shroud & Fins System Drive Belts Check For Wear And Tension Mower Blade Check For Wear, Damage...

  • Page 24: Warranty

    This warranty does not apply to parts that have been damaged by accident, alteration, abuse, improper lubrication, normal wear, or other cause beyond the control of SNAPPER. This warranty does not cover any machine or component part that has been altered or modified changing safety, performance, or durability.

  • Page 25: Primary Maintenance

    PRIMARY MAINTENANCE...
  • Page 26 PRIMARY MAINTENANCE...
  • Page 27 PRIMARY MAINTENANCE...
  • Page 28 PRIMARY MAINTENANCE...

  • Page 29: Product Registration Form

    Date of Purchase ___________________________________________________________ Retailer____________________________________________________________________ Retailer’s Phone Number ____________________________________________________ It is very important that you register your purchase with Snapper to ensure warranty coverage. Please mail your product registration card to: Snapper at P.O. Box 777, McDonough, Georgia 30253. Or you may register on line at www.snapper.com.
  • Page 30 NOTES...
  • Page 31 NOTES...
  • Page 32 NOTES...

  • Page 33: Important

    WALK BEHIND MOWERS SERIES 17 Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissions information and critical safety warnings. Read, Understand, and Follow all warnings and instructions in this manual, the engine manual, and on the machine, engine and attachments.

This manual is also suitable for:

Rp2167517bveRp215517hc

Table of Contents