Snapper RPX102 Owner's Manual page 74

(13) DUMP LEVER HANDLE
(14) MOWING DECK ELEVATION ADJUSTMENT LEVER
The lever serves to set the elevation height of the mowing deck from the ground.
When travelling without mowing the lever must be set to the highest position.
(15) BY-PASS LEVER – FREE MOVEMENT OF THE REAR WHEELS
The bypass lever serves to disengage the transmission for the rear wheel drive and is used to push or pull the mower without using
the engine. The lever is located behind the left rear wheel and has the following two positions:
(16) FULL GRASS CATCHER FLAP
Indicates that the grass catcher is full.
(17) REAR HITCH
It serves the purpose of attaching the trailer (optional accessory)
(18) GRASS CATCHER POSITION LOCK SPRING
Retains the grass catcher in position when travelling across uneven terrain.
(19) GRASS CATCHER PRESENCE SENSOR
If the grass catcher of the grass deflector (optional accessory) are not present on the mower, the mower will not start the mowing
deck.
The lever serves to empty the grass catcher.
More information 5.6.
The lever has 6 work positions, which correspond to a mowing height of 2.5 to 8 cm.
The higher the number of the lever position, the higher vegetation height remains after mowing.
Lever
position
[0] – Lever
extended
[1] – lever
retracted
Rear wheel drive
DISENGAGED
ENGAGED
74
Use
For pushing the mower, the
engine is off
When driving, the engine is
running