Printer specifications and requirements
Space requirements
Printer placement
Component
Width
Printer
92.3"/ 2380 mm
Tray 4 (HCF)
48.07"/ 1221 mm
HCS
45.28"/ 1150 mm
HCSS
35.2"/ 895 mm
6-6
You should consider the following factors when deciding where to
place the printer hardware components:
•
Adequate work space and service clearance around the
equipment
•
Proximity to electrical and network connectors
•
Security of the work area. You may need to place the system
in an area where you can restrict access to it. This may be
important if your personnel need to print confidential
documents or if you are concerned with unauthorized usage.
Dimensions and weights of the printer components are listed in
this section, along with diagrams, to help you visualize the sizes
and total space requirements.
The following configurations are available for your Xerox
DocuColor 2060 NPS/IPS printer:
•
Standard printer with (three-tray) feeder
•
Standard printer with Tray 4 (high capacity feeder, or HCF)
•
Standard printer with High Capacity Stacker (HCS)
•
Standard printer with Tray 4 and High Capacity Stacker
(HCS)
•
Standard printer with High Capacity Stacker Stapler (HCSS)
•
Standard printer with Tray 4 and High Capacity Stacker
Stapler (HCSS)
Refer to the following table for the dimensions and weights of the
DocuColor 2060 NPS/IPS printer and accessories.
Table 6-3. Dimensions and weights
Depth
37.x"/ 950 mm
29.53"/ 750 mm
26.77"/ 680 mm
24"/ 600 mm
Height
Weight
55.6"/ 1412 mm
1874.25 lbs./ 850
kg.
55.6"/ 1412 mm
425 lbs./ 192.95 kg.
43.70"/ 1100 mm
342 lbs./ 155 kg.
Installation Planning Guide