High-Capacity Stacker Modes - Xerox DocuColor 2060 Installation Planning Manual
Xerox docucolor 2060: install guide
Hide thumbs
Also See for DocuColor 2060:
- Supplementary manual (216 pages) ,
- Administration manual (109 pages) ,
- Maintenance manual (88 pages)
Table of Contents
Advertisement
Tray capacity
Top Tray mode
Stack mode
Installation Planning Guide
6. Front
7. Decking plate to DocuColor 2060 NPS/IPS
8. Left side
The stacker cart has a capacity of 3500 sheets of 24 pound (90
gsm paper.
High-capacity stacker modes
The high-capacity stacker offers the following options for output.
The high-capacity stacker diverts sheets that are too small or too
large to be stacked and proof sets to the top tray. The capacity of
the top tray is 250 sheets of 24 pound (90 gsm) paper.
NOTE: When printing labels the back sometimes comes off
when using the Stack mode. Use the Top Tray mode when
printing labels to avoid this problem.
Stacks collated sets as received from the printer. The stacker
tray has a capacity of 3500 sheets of 24 pound (90 gsm) paper.
NOTE: When printing labels the back sometimes comes off
when using the Stack mode. Use the Top Tray mode when
printing labels to avoid this problem.
Printer components and options
3-17
Advertisement
Table of Contents
