Xerox DocuColor 2060 Installation Planning Manual page 203

HCU
hardware
header page
hexadecimal
hierarchy
highlight color
host
host interface
HSB
identifier (id)
image area
implementation
impressions per
minute (ipm)
in-front page
initialize
Installation Planning Guide
Host Channel Unit. A component of the channel-attached
system, which provides the interface between the host channel
controller. Used for IPDS printing only.
Physical components (mechanical, magnetic, electronic, etc.) of
a system, as opposed to programs, procedures, rules, and
associated documentation. The hardware is operated by
software and firmware.
Page printed at the beginning of a job that provides information
about the print job, such as the name of the document and the
job sender.
Numbering system with a base of 16. In this system, 10 through
15 represented by A through F, respectively.
Relative priority assigned to arithmetic or logical operations that
must be performed.
Printing with black plus one other color in a single pass. In
models 4850, 4890, and 92C, a range of shades and tints is
printed by varying the percentage of black dots, color dots, and
white space between the dots within a given square area of the
page.
Computer accessed by users which serves as a source of high-
speed data processing for workstations with less computer
power. Commonly referred to as mainframe.
Connection between network and host computer.
A printing industry standard color definition model in which all
colors are defined in terms of values for hue, saturation, and
brightness. Refer to color definition model.
Characters used to identify or name data and possibly to indicate
certain properties of that data.
Area on a physical page that may contain text or graphics.
Process of installing system hardware and software. Also the
process of converting a design into an actual working system.
The number of pages (one side) a printer can print during the
space of one minute. Used interchangeably with pages per
minute (ppm).
A term that refers to the top page of a double-sided sheet.
1. To prepare the magnetic surface of a blank diskette so that it
can accept data.
2. To set all information in a computer system to its starting
values (usually the first step is accomplished when a program
is booted).
Glossary
11