Default settings for the printer engine
Setting for printing on non-standard or oversize paper
Setting for printing on non-standard paper size
7-22
3. Touch the button for the default language you want to
appears on the touch screen.
After exiting the Tools mode, you can switch the touch screen
to the other language by pressing the Dual Language button
on the control panel.
4. Touch Close to return to the Machine Defaults 1 screen.
You can run non-standard sized paper from trays 3 and 4, and
oversize paper from trays 1 and 2.
NOTE: Be sure to select Non-Standard Size on the top front of
the tray and use the paper weight indicator at the right side of the
tray to select the paper weight being used.
To set for printing on non-standard paper size:
1. Access the Tools mode (refer to the section "Accessing the
Tools mode" in this chapter).
2. On the Machine Default 1 screen, touch the Non-Standard
Size Paper button. The Non-Standard Size Paper screen
displays.
Figure 7-23. Non-Standard Size Paper screen
3. Touch the Tray 3 (or Tray 4) button.
Guide to Performing Routine Maintenance