Xerox DocuColor 2060 Maintenance Manual page 69

Guide to Performing Routine Maintenance
4. On the second Paper Registration Adjustment screen, select
the tray from which the paper is feeding.
Figure 7-17. Paper Registration Adjustment screen
(second screen)
NOTE: The Tray 4 button displays only if you have this
optional tray connected to your printer.
5. Use the up or down arrows that are displayed to enter the
amount of adjustment for either or both edges.
NOTE: Remember that the Lead Edge Registration
adjustment is the feeding edge, or Y direction. The Side Edge
Registration adjustment is the front to back, or X direction.
If the reference point on side two is closer to the edge of the
paper compared to the reference point on side one, enter a
plus figure. If the reference point on side two is further from
the edge of the paper compared to side one, enter a minus
figure.
Example: If the measurement is 1.2 mm closer to the edge of
the paper, enter +1.2 mm.
Default settings for the printer engine
7-17