Setting The Time - Xerox DocuColor 2060 Maintenance Manual

Default settings for the printer engine

Setting the time

7-20
To set the time:
1. Access the Tools mode (refer to the section "Accessing the
Tools mode" in this chapter).
2. On the Machine Default 1 screen, touch the Set Date & Time
button. The Set Date & Time screen displays.
Figure 7-20. Set Date & Time screen
3. Touch the Set Time button. The Set Time screen displays.
Figure 7-21. Set Time screen
4. Touch the 12 Hour Clock or the 24 Hour Clock button.
Guide to Performing Routine Maintenance