Setting The System Timers; Accessing The Timers - Xerox DocuColor 2060 Maintenance Manual
Guide to performing routine maintenance
Hide thumbs
Also See for DocuColor 2060:
- Installation planning manual (218 pages) ,
- Supplementary manual (216 pages) ,
- Administration manual (109 pages)
Table of Contents
Advertisement
Default settings for the printer engine
Setting the system timers
Accessing the timers
7-6
This feature allows to change the factory default settings for the
following timers in the printer:
•
Power Saver
•
Screen Saver
•
Job Spacing
•
Tools Off
•
Auto Resume Stop
To access the printer timers:
1. Access the Tools mode (refer to the section "Accessing the
Tools mode" in this chapter).
2. On the Machine Default 1 screen, touch the System Timers
button. The System Timers screen displays.
Figure 7-7. System Timers screen
NOTE: The following timers are not functional with the
DocuColor 2060 NPS/IPS:
•
Auto Resume Scan
•
Auto Resume Print
•
Auto Resume Hold
Guide to Performing Routine Maintenance
Advertisement
Table of Contents
