Xerox 4110 Configuration And Setup page 52

S F EXP4110 C P 52
ETTING UP THE IERY FROM THE ONTROL ANEL
Fiery E-mail Domain Name
This option appears only if you have selected Yes to Enable Remote Diagnostics. For more
information, see the documentation that accompanies your printer. Enter the mail box
name specified on the mail server. The client mail service acknowledges e-mails sent to the
Fiery EXP4110 E-mail Service using this account name.
Enter the name of the domain in which the Fiery EXP4110 e-mail account is located, up to a
maximum of 19 characters. This is typically the part of the e-mail address that follows the @
symbol. For example, in the address , the domain name is .
pat@test.com test.com
Account Name
youraccount
Enter the mailbox name specified on the mail server, up to a maximum of 78 characters. The
client mail service acknowledges e-mails sent to the Fiery EXP4110 E-mail Service using this
account name.
This is the internal name your network recognizes, which is not necessarily the same as User
Name. Use the following characters for the account name:
0-9 A-Z, ! # $ % & ' * + - / = ? ^ _ ' { | } ~
Password
Enter the password for the e-mail account, up to a maximum of 16 characters.
Administrator E-mail User Name
youremail@yourdomain.com
Enter the user name of the Administrator e-mail account, up to a maximum of 80 characters.
This is typically the part of the e-mail address that precedes the @ symbol. For example, in the
address , the user name is .
pat@test.com pat
Administrator E-mail Domain Name
yourdomain.com
Enter the name of the domain where the administrator has an account, up to a maximum of
19 characters. This is typically the part of the e-mail address that follows the @ symbol. For
example, in the address , the domain name is .
pat@test.com test.com
Timeout (sec)
30–300 [30]
Enter the length of time, in seconds, the Fiery EXP4110 should try to connect to each e-mail
server before determining that the connection is unsuccessful.
Polling Interval (sec)
5-3600 [15]
If you have enabled auto-checking for new messages in the previous option, enter the interval
in seconds at which the Fiery EXP4110 should automatically check for new e-mail.