Remote Setup - Xerox 4110 Configuration And Setup

S
ETTING UP THE
The Setup window appears.
You see the available settings only when you select the particular option. For example, to view
or change the setting for the Character Set option, click Character Set. The available settings
appear at the bottom of the window.
After making your selections in the window, click Apply, if it is present. When you finish,
click OK to close the entire Setup window.

Remote Setup

Remote Setup is performed from a computer using Configure or Command WorkStation,
Windows Edition. Remote Setup is not supported for Command WorkStation, Macintosh
Edition.
T C
O ACCESS ONFIGURE
1 Start your Internet browser and type the IP address of the Fiery EXP4110.
2 Click the Configure tab on the Fiery EXP4110 home page.
3 Click Launch Configure.
4 Log on as Administrator with the appropriate password.
T S C
O ACCESS ETUP FROM OMMAND
1 Start Command WorkStation.
2 Log on as Administrator with the appropriate password.
F EXP4110
IERY FROM A NETWORK COMPUTER
W S , W
ORK TATION INDOWS
E
DITION
60