Configuring Web Tools; Configuring The Fiery Exp4110 And Clients For Webtools; Setting Up The Fiery Exp4110 To Allow User Access To Webtools - Xerox 4110 Configuration And Setup

C
ONFIGURING
Configuring the Fiery EXP4110 and clients for WebTools
T
O SET UP
T
O SET UP
T
O ACCESS
C W
ONFIGURING EB
W T
EB OOLS
WebTools allow you to manage your Fiery EXP4110 remotely from the Internet or from your
company's intranet. The Fiery EXP4110 has its own home page, from which you can select
the WebTool that you want to use.
For information about using WebTools, see Utilities.
WebTools provide access to many Fiery EXP4110 functions via the Internet (or intranet),
providing additional flexibility in remote management. After they are enabled, you can access
the WebTools from a network computer.
W T F
EB OOLS ON THE
1 In Fiery EXP4110 Network Setup, enable TCP/IP.
2 Set a valid, unique IP address, subnet mask, and gateway address (if required) for the
Fiery EXP4110.
3 Enable Web Services.
4 In Fiery EXP4110 Printer Setup, confirm that the Print queue is published.
W T
EB OOLS ON A COMPUTER
1 Enable TCP/IP networking.
2 Assign the workstation a valid, unique IP address, subnet mask, and gateway address,
if required.
3 Install an Internet browser that supports the Java language and frames.
Make sure Java is enabled. For more information about supported browsers and WebTools
requirements, see Welcome.
W T
EB OOLS
1 Start your Internet browser and type the IP address of the Fiery EXP4110.
The Fiery EXP4110 home page appears.
2 Click the tab corresponding to the WebTool.
T
OOLS
EXP4110
IERY
78