Xerox 4110 Configuration And Setup page 40

Network Setup
Service Setup
LPD Setup
Network Setup
Service Setup
PServer Setup
Network Setup
Service Setup
PServer Setup
S F EXP4110
ETTING UP THE IERY
LPD Setup options
Enable LPD
Yes/No [Yes]
Select Yes to allow lpd printing.
PServer Setup options
N : If you do not use PServer Setup, continue with the remaining Service Setup menus
OTE
starting with "Windows Setup options"
Enable PServer
Yes/No [No]
Select Yes if you have a Novell network connected to the Fiery EXP4110.
Choose NDS Setup if your network uses NetWare in native mode. Choose Bindery Setup if
your network uses NetWare in bindery emulation mode.
If your network uses both NDS and Bindery, set up NDS first. If you set up NDS after
Bindery, you will overwrite Bindery Setup.
N : If your network uses both NDS and Bindery, and uses NetWare servers in bindery
OTE
emulation, the Fiery EXP4110 cannot service NDS and bindery emulation servers on the
same NDS tree.
NDS Setup
Before entering NDS settings, make sure the Fiery EXP4110 is connected to the network and
that you have configured an NDS directory tree with a Printer, Print Server, and one or more
Print Queue objects for Fiery EXP4110 jobs (see
need permission to browse the NDS tree. If access to the Print Server is restricted, you must
have a logon password.
C P
FROM THE ONTROL ANEL
on page 48.
page 12). To perform NDS Setup, you may
40