Removing The 4-Cell Battery - Dell 24CFV Service Manual

Steps
1. Place the battery on the palm-rest and keyboard assembly.
2. Fold back the hard-drive FFC over the battery.
3. Align the screw holes on the battery to the screw holes on the palm-rest and keyboard assembly.
4. Replace the three screws (M2x3) that secure the battery to the palm-rest and keyboard assembly.
5. Connect the battery cable to the connector on the system board.
Next steps
1. Install the base cover.
2. Install the SD card.
3. Follow the procedure in

Removing the 4-cell battery

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the base cover.
About this task
The following images indicate the location of the battery and provides a visual representation of the installation procedure.
after working inside your
before working inside your
computer.
computer.
Removing and installing components 23