System Board; System Board Connectors; Removing The System Board - Dell 24CFV Service Manual

Next steps
1. Install the IO board.
2. Install the base cover.
3. Exit service mode.
4. Install the SD card.
5. Follow the procedure in

System board

System board connectors

The following image shows the different connectors on the system board.
1. Fan connector
2. IO board FFC connector
3. eDP connector
4. DC-in port connector
5. Keyboard FFC connector
6. Backlit FFC connector
7. Memory module connectors
8. Battery connector
9. Touchpad FFC connector
10. Hard-drive FFC connector
11. WLAN connector
12. Speaker cable connector
13. SSD connector

Removing the system board

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
76 Removing and installing components
after working inside your
before working inside your
computer.
computer.