Steps
1. Align the rib inside the left-hinge cap to the outer sides.
2. Push the left-hinge cap down until it clicks in place.
3. Align the rib inside the right-hinge cap to the outer sides.
4. Push the right-hinge cap down until it clicks in place.
Next steps
1. Install the
display
assembly.
2. Install the
WLAN
card.
3. Install the
base
cover.
4. Exit
service
mode.
5. Install the
SD
card.
6. Follow the procedure in
56
Removing and installing components
after working inside your
computer.