Setting The Printer Driver (Mac Os 9.X Or Earlier) - Xerox WorkCentre 7132 User Manual

7.
Confirm the Install Location for the [AdobePS Components] folder and change it if
necessary, then click [Install].
Installation begins.
8.
When the dialog box showing installation has completed appears, click [Restart]
or [Quit].
This completes the installation.
Proceed to Setting the Printer Driver (Mac OS 9.x or earlier) on page 53 to continue.

Setting the Printer Driver (Mac OS 9.x or earlier)

When you finish installing the Adobe PostScript printer driver, set the PostScript Printer
Description (PPD) file for this machine to the printer driver.
The printer driver controls the functions of this machine based on the information in the
PPD file.
1.
Make sure that the machine is on.
2.
Check that the machine's EtherTalk port is set to Enable.
You can check the EtherTalk settings in the System Settings List. See User Guide
for details about how to print the System Settings List.
3.
On the Apple menu select [Chooser], then click [Adobe PS].
4.
Select your printer from the Select a PostScript Printer list box, which appears to
the right of the Chooser, then click [Setup].
NOTE: You must be connected to the printer for its name to appear in the list box.
This automatically searches for the printer and sets the PPD file.
If the search for the PPD file is not automatically performed:
(1) Click [Select PPD].
Xerox WorkCentre 7132 PostScript® User Guide
5 Operation on Macintosh Computers
53